How to apply Direct to Film DTF Transfers | How to DTF Instructions website

Apply Instructions

Please follow these instructions using a HOME IRON:

  1. Set home iron on Cotton/linen. Preheat to highest settings 320-340 degrees and make sure No water No steam.
  2. Place garment on a flat hard surface, then Iron garment to get wrinkles and moisture out.
  3. Place the design sheet on garment (Design facing up).
  4. Apply heavy pressure for 40-45 seconds.
  5. Peel Cold: Leave to cool down for a minute, then peel off the top liner from the adhered image, Gently.
After peeling off the design, place parchment paper on top of the design, or flip the garment over and apply some pressure heat again for an additional 10 seconds... that will help the design stick more to the garment.
Note: while peeling off the design, if you see part of the design didn't transfer or stick to the garment, re-press with the iron on this area for another 5-10 seconds, then try to peel off again after cooling down for a minute. Enjoy!

 

Professional Heat Press:
150c-160c, 8S, 7-9KG

Instrucciones especiales para el vendedor
Add A Coupon

Buscar nuestro sitio


Popular Searches: Transfers  Stickers  Ready shirts  Sublimation