Smoking Bear 1

Using a Home Iron:
*This design is cold peel

1- Set iron to Cotton/linen.
Preheat to highest settings 320-340 degrees, and make sure the steam is off.

2- Place the garment on a flat, hard surface, then Iron the garment to remove any wrinkles or moisture.

3- Place the design sheet on the garment facing up.

4- Iron transfer onto the garment by applying heavy even pressure for 40-45 seconds.

5- Peal Cold: Leave to cool down for a minute, then gently peel off the top liner from the adhered image.

6- Recommendation: After peeling off the design, place parchment paper on top of the design, or flip the garment over and apply some heat press again for an additional 10 seconds.

Note: while peeling off the design, if you see part of the design didn't transfer or stick to the garment, re-press with the iron on this area for another 5-10 seconds, then try to peel it off again. Enjoy! 🥰

Can also be applied using an easy press, or heat press, different heat settings and times must be applied.

For best results, wait at least 24 hours after pressing transfers.
Turn the garment inside out.
Machine wash cold.
Tumble dry on low heat.
**Do not iron over transfer**

CLICK HERE to view what our customers are saying about us on Judge.me ❤️

You can apply to:
100% Cotton
Polyester, Blends
Triblends, Denim, Canvas, Nylon, and Leather

Please note that due to different display graphic cards, and room lighting reasons, it may have a slightly little color difference between images and actual product.

ALL SALES ARE FINAL!

But if you have any questions or concerns please feel free to contact customer service.